What vehicle branding fitment covers
Vehicle branding fitment is the process of applying decals, cut vinyl and printed graphics to your vehicle so it carries your name, contact details, services and safety message wherever it goes. We work on single cars, service vans, bakkies, trailers and small fleet runs from our Rustenburg CBD base, and we plan each job around the shape of the body panels, handle positions, curves and existing paint condition.
Our fitment service covers cleaning preparation, panel alignment, application, trimming, post heating where needed and a final check for edge lift. For work vehicles used on dusty roads, in mining areas or around school routes, we also recommend material choices that hold up better in sun, dust and frequent washing. On lighter coloured vehicles the artwork shows well, while darker vehicles may need white underlay or solid panels for clear visibility.
Typical branding includes side doors, bonnet details, rear door contact panels, tailgate text, reflective safety markings and full or partial wrap sections. We also fit decals for service codes, fleet numbers and directional arrows. If your vehicle has light scratches or stone chips we will advise where branding can still go cleanly and where a panel may need attention first.
Materials, sizes and finish options we use
We supply and fit printed vinyl for full colour branding, cut vinyl for text and logos, and protective laminate where extra weather resistance is needed. For most fleet vehicles we use materials suited to outdoor use, with print that can handle strong sun, road dust and regular washing. Coastal humidity is not a big issue in Rustenburg, but summer heat and afternoon storms can still affect installation timing, so we fit in controlled conditions where possible.
The exact size depends on the vehicle and the artwork, but common fitments include door logos from 300 mm to 900 mm wide, tailgate panels around 600 mm to 1200 mm wide, and larger side graphics up to the full height of the door. Reflective elements can be added for safety on work vehicles that travel early in the morning or after dark. We also offer matte and gloss finish choices depending on the look you want.
- Printed vinyl for logos, full colour images and service panels
- Cut vinyl for names, phone numbers and simple wording
- Reflective film for safety markings and night visibility
- Lamination for added scuff resistance and colour protection
- Fleet numbering for easy vehicle identification
How the fitment process works from artwork to road ready
We start with your layout, logo files or printed brief, then our graphic design team prepares the artwork to suit the exact vehicle measurements. If you have a fleet of mixed vehicles, we set up one master style and then adjust it for each body shape so the branding stays consistent. Mpho Ndlovu checks the artwork setup and print scaling before production starts.
After printing, the vinyl is allowed to settle before fitment. The vehicle is washed and dried, and the fitment area is cleaned to remove polish, dust and road film. Johan van Wyk and the production team then apply the graphics, making sure the panels sit straight, the edges are pressed down properly, and any cut outs around handles, fuel caps or trim are neat. Jurie Geldenhuys handles fitment support where larger panels or more difficult placements are involved.
- Artwork check and panel measurements
- Print or cut production with colour matching
- Vehicle surface cleaning and preparation
- Careful application and edge finishing
- Final inspection and handover with care notes
For businesses that need same week turn around, we can sometimes schedule faster fitment if the artwork is approved early and the vehicle is available on time. Simple name and number jobs are quicker than full side branding or multi vehicle fleet work, so we plan according to your deadline and your operating schedule.
Turnaround times and what affects the schedule
Small decal jobs can often be completed within 1 to 2 working days after artwork approval, while standard side branding usually takes 2 to 4 working days. Larger jobs, reflective fleets or vehicles that need more detailed panel work may take longer. We will always give a practical schedule before production starts so you can plan around deliveries, school runs or mine site access requirements.
Turnaround is affected by the amount of artwork changes, the number of vehicles, the condition of the bodywork and whether the vehicle needs to stay overnight for curing. Weather can also matter. In Rustenburg, strong sun can make fitting more difficult in the middle of the day, so we sometimes schedule early morning or later afternoon slots. That helps the vinyl bond better and keeps the finish cleaner.
If you are branding several bakkies or vans for different branches, we can group the work to save time and reduce handling. Mbalenhle Motaung manages the job flow so printing, fitting and collection do not get mixed up, which matters when vehicles are needed back in service quickly. For busy clients, we can stagger the fitment dates instead of taking all vehicles off the road at once.
Pricing approach for single vehicles and fleets
Vehicle branding pricing is based on the size of the graphics, the amount of vinyl used, the complexity of the fitment and the type of finish required. A small rear window decal costs far less than full side panels with reflective film or a wrapped bonnet section. We quote from the actual vehicle and the approved artwork, so you know what you are paying for before we start.
For fleets, we price per unit and allow for repeat artwork setup where the same layout is used across multiple vehicles. That helps keep the Rand cost manageable for schools, contractors, medical teams and mining suppliers that need consistency across a few or many vehicles. We can also separate design, print and fitment on the quote if you already have approved artwork and only need installation.
There are no hidden extras for basic clean up before fitting, but if a vehicle arrives with wax, old adhesive or damaged paint we will flag the issue first. That way the finish lasts better and there are no surprises later. Amogelang Cele can talk you through the quote structure and advise on the best option for your budget and route usage.
Care, washing and recheck intervals after fitment
New branding should be left to settle before heavy washing. As a rule, we suggest avoiding a high pressure wash for the first 48 hours after fitment, and keeping harsh scrubbing off the edges for at least a week. After that, normal washing is fine, but it is best to avoid direct pressure on seams and corners. That helps stop lifting and keeps the artwork looking sharp.
For vehicles used daily on mine roads, dusty routes or school transport runs, we recommend a visual check every 3 to 6 months. Look for lifted corners, stone chip damage, fading on sun exposed panels and scratches around handles or loading areas. If a section starts to peel, it is usually better to fix it early rather than wait for the whole panel to fail. Small maintenance jobs are much cheaper than replacing a damaged set later on.
- Avoid pressure washing for 48 hours after installation
- Do not scrub edges with hard brushes or rough cloths
- Inspect edges and joins every 3 to 6 months
- Book a touch up if lifting starts on any panel
- Keep heavy chemicals off branded areas where possible
We can also advise on removing old branding before applying new graphics, especially if the vehicle is being rebranded for a different branch or new service line. If you need the same look across Rustenburg, Tlhabane, Phokeng, Kroondal, Boshoek, Marikana, Mooinooi or Mogwase, we can keep the style consistent across the full range.
Key facts
| Service area | Rustenburg and Bojanala |
|---|---|
| Vehicle types | Cars, vans, bakkies and trailers |
| Common graphics | Decals, cut vinyl, printed vinyl, reflective markings |
| Typical turnaround | 1 to 4 working days after approval |
| Finish options | Gloss, matte and laminated |
| Care check interval | Every 3 to 6 months |
